OPCOM 2014V diagnostic tool for Opel cars covers almost all models of Opel cars, even new cars with CAN-BUS-based diagnostics. Such as diagnostic function for Vectra-C, for Astra-H, for Zafira-B, etc. It lets you read and clear fault codes and supports many control units. Opcom OP-Com 2014 V Can OBD2 for Opel Firmware V1.99 with 18F45K80 Chip.
1. It covers almost all Models for Opel cars, even new cars with CAN-BUS-based diagnostics, such as the Vectra-C, the Astra-H, the Zafira-B, etc.
2. The programme lets you read out and clear fault codes, shows you live data, and lets you perform an output test.
3. The programme supports many control units, like the engine, automatic transmission, ABS, engine cooling module, instrument cluster, electronic climate control, and body control unit, just to name a few examples.
4. Since there are many pins used in the OBD connector for Opel, the diagnostic interface works as a multiplexer and selects the appropriate pin for communication. PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information:
Full Fault Code Text Description:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or imitate the fault codes in any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The programme shows you measuring block information on many control modules; you can choose anything from the list on your own.
4) The programme is capable of showing eight measuring block parameters simultaneously. The sample rate depends mostly on the communication protocol. For example, older systems, like the Omega-B X 25 DT Engine (ISO-9141-2), can be very slow during communication, while newer Multec or Bosch units are faster (using KWP-2000), and the newest CAN-based control units are very fast!
You can also run output tests on many controllers.
PIN6-PIN14
PIN3-PIN11
PIN1
HSCAN: dual-wire, high-speed CAN-BUS, 500 kbps
MSCAN: dual-wire, medium-speed CAN-BUS, 95 kbps
SWCAN: single-wire, low-speed CAN-BUS, 33.3 kbps
V1.99 OP COM OBD2 Scanner
Attention for V1.99 OP-COM OBD2 Scanner Diagnostic Tool Software
1. If you run it on XP or Win7, please make sure you install dotnetfx35_SP1 system patch, or Opcom software can't perform well
2. When you install on Win7 and open software, please choose Run as administrator and read the installation video on CD carefully
Q: What can this device do?
A:1. You will get feedback on the state of the activated output. This will help you find the failure. Components more easily. With OP-COM, you can learn keys to the immobiliser and remote keys to the central door locking.
2. You can also reset and programme the following immobilizer-related items: ECM, BCM, and IPC.
3. You will need the vehicle security code, which can be found on the CAR-PASS.
4. You can also reset and programme the Service interval reminder for Astra-G, for Zafira, for Corsa-C, and Meriva
5. You can code SAB6 and SAB8 with the software.
6. The diagnostic interface is USB port-based, so there will be no compatibility issues with serial-to-USB converters.
7. The speed of the communication over the USB-BUS is enough to handle the awesome speed of the high-speed CAN-BUS systems, which is currently 500 kbps. This is the main reason why only the USB port-based interface is available for CAN-BUS.
8. Compared to the TECH2, which is the dealer tool (with a 32 MB Card+CANdi interface), the price of OP-COM is quite affordable.